Roofing

Self Installed Rubber Roofing – Proper Prepping is important

While you might have read various claims that rubber roofing is perfectly fine when installed over existing shingles, in fact most self installed rubber roofing manufacturers won’t recognition the warranty on any roof which isn’t placed on a totally clean surface. So before beginning installing your rubber roofing, you will need to tear up and dispose your overall shingles, and set lower a brand new plywood underlayment in case your roof requires it.

Benefits of Self Installed Rubber Roofing

Self installed rubber roofing comes in a number of styles, both in rolls and shingles of various colors, but all are installed in the same way. Self installed rubber roofing, if laid properly, will safeguard your homes roof for a long time in all sorts of weather, and won’t be susceptible to splitting nor cracking. Self installed rubber roofing is a perfect roofing material for big flat roofs.

Because self installed rubber roofing is flexible, it may “breathe” together with your roof because the roof expands and contracts as a result of alterations in temperature. Due to this, self installed rubber roofing encounters significantly less stress than traditional asphalt roofing materials, and also the first rubber roof that was set up in Wisconsin in 1980 continues to be performing perfectly after nearly 30 years of Wisconsin winters!

All self installed rubber roofing, whether shingle or roll style, is connected to the roof’s surface with adhesive. Therefore the roof itself should be as clean as you possibly can and also have nothing protruding that could piece the rubber roofing when stepped onto.

The adhesive accustomed to secure the self installed rubber roofing won’t setup correctly on the moist, dusty, or dirty surface so that all water, oil, debris, and dirt ought to be scrubbed or cleared up, having a leaf blower accustomed to eliminate the roof of dust.

Installing The Rubber Roofing

The rubber roofing should then be unrolled to the area being covered, and cut to suit around any pipes or vents. The roofing ought to be completely cut and formed towards the roof before adhesive is used into it, so when it’s been cut, the roofing ought to be folded up roughly midway and also the adhesive applied thinly to the top of roof having a deep nap paint roller. The glue ought to be applied evenly in order that it dries flat, after which put on the self installed rubber roof and with time to setup.

When the glue has looking for a couple of minutes, the rubber roofing could be folded out to the glued roof surface. It’s important to put the roofing material easily, because it will likely be extremely difficult to lift it once it’s connected to the adhesive on the top. Permit the first 1 / 2 of the self installed roofing to dry to have an hour and repeat the whole process using the partner!

Related Articles

Back to top button
Close
Close